Pezzo finale profilato porta scorrevole Al 45

End piece for sliding door profile Al 45

Name: End piece for sliding door profile Al 45
Brand: Bosch Rexroth
SKU: 3842191194

Die-cast aluminium end piece for the sliding door profile Al 45: acts as a stop for the sliding elements and is locked in the slot with the included M8x16 grub screw. ESD conductive.

End piece for sliding door profile Al 45

At the end of travel, sliding leaves must stop at a precise point. The end piece is inserted into the end of the sliding door profile Al 45 and acts as a stop. You lock it in the profile slot with the included DIN 916 M8x16 grub screw.

45x45Die-cast aluminiumStop for leavesM8x16 screw includedESD

Why choose it

End-of-travel stop

Stops the sliding elements.

Screw locking

M8x16 grub screw in the profile slot.

Conductive

In die-cast aluminium, suitable for ESD areas.

Data and compatibility

Property	Value
For	Sliding door profile Al 45
Dimensions	45 x 45 mm
Material	Die-cast aluminium
Fastening included	DIN 916 M8x16 grub screw
ESD	Yes
Code	3 842 191 194

To close the end without a stop use the grey PP cover cap.

Downloads

MGE catalogue pages 15 Download PDF

Related products

Sliding door profile Al 45Sliding door profile Al 45

Cover cap for sliding door profile Al 45Cover cap for sliding door profile

Sliding profile Al 45Sliding profile Al 45

Inner bracketInner bracket bracket for mounting

Any other questions?Read the 12 FAQs →

Need help with your profile parts list?

Send us a sketch or the parts list: we will give you codes, accessories and cut lengths.

Request a quote Call +39 0434 572757

Specifications

Brand	Bosch Rexroth
ESD	yes
Technical notes	Incl. screw DIN 916 M8x16
Dimensions mm	45x45
Slot mm	10
Material	Die-cast aluminium
Slot mm	10

Tags
Tags	Bosch 5S1

The cover cap is a finishing and protective cover. The die-cast aluminium end piece acts as a stop for the sliding elements and is locked in the slot with a grub screw.

You insert it into the end of the profile and tighten the M8x16 grub screw in the slot: the end piece stays locked.

No, it is made of polypropylene. The die-cast aluminium end piece, on the other hand, is conductive.

One for each end of the profile where the leaf needs a stop.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.