Skip to Content
  1. All Products
  2. AL Modular System
  3. Strut profiles
  4. Slot C10 (10 mm)
  5. Aluminium strut profile 90x135L
Profilo in alluminio 90x135L

Aluminium strut profile 90x135L

https://leanproducts.eu/web/image/product.template/3665/image_1920?unique=1d9bc53

Aluminium strut profile 90x135L with ten 10 mm slots: intermediate section between 90x90L and 90x180L, stiff in both directions with Ix 629.4 and Iy 305.2 cm⁴. 8.89 kg/m, 6070 mm bar or cut to length.

Read more ↓
Code: 3842996242
Length: 6,070
  • Brand
  • Section mm
  • Slot mm
  • Max length mm
  • Cross-section area cm²
  • Moment of inertia Ix / Iy cm⁴
  • Section modulus Wx / Wy cm³
  • Length
  • Weight
  • Material

Cut dimensions

mm
135 × 90 mm Real profile section
0Full bar 6070 mm
Calculating price…
Full bar Full sheet of the sheet From {min} to {max} mm · full bar {max} mm Up to {maxl} × {maxw} mm · minimum {min} mm Length between {min} and {max} mm. Width between {min} and {max} mm.

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Brand Bosch Rexroth
Section mm 90x135
Slot mm 10
Cross-section area cm² 32.94
Moment of inertia Ix / Iy cm⁴ 629.40 / 305.23
Section modulus Wx / Wy cm³ 93.26 / 67.84
Max length mm 6070
Length 6070
Weight 8.89 kg/m
Material Anodized aluminium

With two cover caps side by side: one 90x90L and one 45x90, in signal grey PP or ESD black.

The 90x180L is stiffer about the strong axis (Ix 1380 cm⁴ versus 629.4) and weighs 11.6 kg/m; the 90x135L weighs 8.89 kg/m and is more compact. If the span is short or the load medium, the 90x135L saves you weight.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products