Skip to Content
  1. All Products
  2. AL Modular System
  3. Feet and wheels
  4. Accessories for feet
  5. Base plate for posts

Base plate for posts

https://leanproducts.eu/web/image/product.template/3587/image_1920?unique=1d9bc53

Base plate for anchoring profile posts of fences and partition walls to the floor: 120x120 and 150x150 flush, 135x135 in die-cast aluminium, 270x360 in cast iron. Fixed to the floor with wall plugs.

Read more ↓
Code: 3842516175
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Slot mm
  • Size
  • Surface treatment
  • Production method
  • Technical notes
  • Material
  • Dimensions mm
  • Height mm
  • ESD
  • Colour
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Size 270x360 (cast iron)
Material Ghisa grigia
Surface treatment powder-coated
ESD yes
Dimensions mm 270x360
Production method Die casting
Technical notes For posts 45x45; anchoring with anchor 3842540668 and washer
Height mm 110
Colour black
Slot mm 10
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

For a 45 post flush with the edges, with no protrusions to trip over, the 120x120; for 45 and 60 profiles the 150x150. The 135x135 connects to the profile with an bracket, the 270x360 in cast iron is the widest base.

The one matching the shape of your foot: round for the AL foot 60x60 and 80x80, square 50x50 for the base plates of posts, Ø 23 for the 45x45 foot. Choose the thickness according to the unevenness to compensate.

With the floor fixing wall plug: Ø 8x80 for the 135x135, Ø 10x90 for 120x120 and 150x150, Ø 8x95 for the 270x360. For 120x120 and 150x150 you can also use the foundation screw for concrete. Use the washers to compensate for unevenness.

It is one of the accessories for the 120x120 and 150x150 base plates flush with the posts, along with the floor anchor and the compensating washers.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.