Skip to Content
  1. All Products
  2. AL Modular System
  3. Feet and wheels
  4. Feet
  5. Foot for posts

Foot for posts

https://leanproducts.eu/web/image/product.template/3608/image_1920?unique=1d9bc53

Feet for anchoring profile posts to the floor: AL foot 60x60 and 80x80 in silver-lacquered aluminium with wide base, 45x45 foot in die-cast zinc with 0–45° angle adjustment, and 5.5x45 self-tapping screw for the 45x45 foot.

Read more ↓
Code: 3842564814
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Surface treatment
  • Production method
  • Technical notes
  • Material
  • Dimensions mm
  • Diameter mm
  • ESD
  • Slot mm
  • Colour
  • Model
  • Length mm
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1 Bosch 5SV
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Material Aluminium
Surface treatment painted
ESD yes
Dimensions mm 80x80
Production method Die casting
Technical notes Piede per supporti; con tassello 3842540668 e rondella; incl. fissaggio
Diameter mm 230
Colour silver RAL 9006
Slot mm 10
Model Foot AL 80x80
Length mm 45
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1 Bosch 5SV

On the 45x45 or 45x45L profile with two M8x25 T-bolts and two M8 flange nuts. On the 22.5x45 frame profile with one 5.5x45 self-tapping screw, one M6x20 T-bolt and one flange nut. No machining needed.

The one matching the shape of your foot: round for the AL foot 60x60 and 80x80, square 50x50 for the base plates of posts, Ø 23 for the 45x45 foot. Choose the thickness according to the unevenness to compensate.

It lets liquids drain, for example during cleaning, and together with the few horizontal surfaces makes the foot easy to clean. The internal stop limits the insertion depth of the profile and can be removed.

The AL foot with the Ø 8x95 wall plug and the 1 or 3 mm washer for round feet; the 45x45 foot with the foundation screw for concrete and the Ø 23 washer.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.