90° reinforcing angle bracket GF-N
Aluminium angle bracket that clamps the sides of two Ø 28 tubes and joins them at 90° while staying within the tube envelope. It is used where the inner connector cannot be used and to reinforce the joints of the profile with C10 slot. 23 g.
Green Frame · Connectors GF-N Ø 28
90° reinforcing angle bracket GF-N
The angle bracket grips the sides of the two tubes and ties them at 90°, without going outside the outline of the frame. It is used where an inner connector cannot be fitted and as reinforcement for weak joints, for example those of the profile with C10 slot in trolley bases. It holds 650 N against slipping and 16 N·m in bending.
Why choose it
Light reinforcement
23 g to stiffen a joint that holds little.
No extra footprint
Stays within the outside dimension of the tube.
Trolley bases
Reinforces the joints of the profile with C10 slot.
Application example
Used to reinforce joints without going outside the frame outline.
- Trolley bases in profile with C10 slot
- Joints where the inner connector does not fit
Data and compatibility
| Specification | Value |
|---|---|
| Series | GF-N Ø 28 |
| Type | Angle bracket, 90° joint on the side of the tubes |
| Compatible with | GF-N Ø 28 tubes and GF-N profile with C10 slot; also clamps GF-G Ø 43 tubes |
| Material | Die-cast aluminium, steel fasteners |
| Weight | 23 g |
| Permissible loads | Slip 650 N · moment 16 N·m vertical, 7.5 N·m horizontal |
| Tightening torque | 10.8 N·m |
| Screw | M6 × 12 in steel |
| Part number | GFJ-032 |
Slip: load that pushes the tube along the upright. Pull-out: load that pulls the tube out of the connector. Moment: bending at the root of a cantilever arm.
GF-N profile with C10 slotProfile with C10 slot
Inner connector for GF-N profile with C10 slotInner connector for slotted profile
GF-N profileStandard Ø 28 tube
45° brace GF-N/G45° brace, for more heavily loaded jointsNeed help choosing connectors?
Send us a sketch of the structure: we will tell you the part numbers, quantities and cut lengths.