Rotating internal 90° connector GF-N
Internal 90° connector for Ø 28 tube that lets the cross member rotate around the joint and locks it at the chosen angle: the simple way to incline the rails of flow racks and gravity shelving. Tightening torque 11 N·m.
Green Frame · Connectors GF-N Ø 28
Rotating internal 90° connector GF-N
It mounts like an internal 90° connector, flush with the tube, but the cross member can rotate around the joint: you bring it to the inclination you need and lock it by tightening the bolt. It is the simplest way to give a slope to the rails of flow racks and gravity shelving, then adjust it according to the material.
Why choose it
Adjustable slope
You set the inclination of the cross member and change it when the material changes.
Flush with the tube
Nothing protruding: boxes roll without catching.
Same holding strength
800 N sliding and 420 N pull-out, like the fixed internal connector.
Application example
Used where a tube must be inclined and the slope has to be adjusted.
- Inclined rails of flow racks and gravity shelving
- Inclined picking surfaces on workstations
- Chutes and guides for boxes
Data and compatibility
| Specification | Value |
|---|---|
| Series | GF-N Ø 28 |
| Type | Internal (flush with the tube), cross member can be oriented and locked |
| Compatible with | GF-N Ø 28 tubes; also clamps GF-G Ø 43 tubes |
| Material | Die-cast aluminium, aluminium bolt |
| Weight | 48 g |
| Permissible loads | Sliding 800 N · pull-out 420 N · moment 9 N·m vertical, 6 N·m horizontal |
| Tightening torque | 11 N·m (5 mm hex key) |
| Part number | GFJ-D24 |
Slip: load that pushes the tube along the upright. Pull-out: load that pulls the tube out of the connector. Moment: bending at the root of a cantilever arm.
GF-N profileStandard Ø 28 tube
Internal 90° connector GF-NFixed 90° version
Internal hinged connector 0-180° GF-NInternal 0-180° hinged joint for diagonal braces
Roller trackRoller track for the flow rack
External plug GF-NPlug for the end of the uprightNeed help choosing connectors?
Send us a sketch of the structure: we will tell you the part numbers, quantities and cut lengths.