Dolly Type VII C

They all have a 600x400 deck (Type I, II and VII B also 600x500) and 100 mm castors. The Type I has 2 swivel and 2 fixed castors and no drawbar: it runs straight and is pushed by hand. The Type II has 4 swivel castors: it turns on the spot and is handy in tight spaces. The Type VII B is like the Type I but with a sliding drawbar and Easy Lock hook, for hitching several dollies in a convoy. The Type VII C adds the raised deck to the drawbar: containers reach the line at gripping height; it carries up to 70 kg, the others 250 kg.

Each dolly has a sliding drawbar at the front and a hook at the rear. To hitch it, just bring the drawbar into the hook area: the pin locks automatically, poka-yoke style, with no tools and no need to line up a hole. It is a patented K.Hartwall system.

Because the container already arrives at hand height: the operator picks without bending towards the floor and without a lifter at the line side. The VII C also makes the journey, hitched in the train: material goes from the warehouse to the workstation without being moved by hand.

Up to 70 kg: it is designed for kits, small parts and light components. In the train, VII C dollies reach 1000 kg in total. For heavier stacks of containers, up to 250 kg per dolly, choose the low-deck Type VII B.

With the Milkrun Drawbar, which fits on the tow vehicle and tows one or two rows of 600x400 dollies or one row of Dolly 800x600. On request there is also the coupling for having one or two rows of Dolly VII and 800x600 towed by a Dolly Pallet. We help you choose based on the tow vehicle you have.

The recommended maximum speed is 4 km/h: with the raised deck the load sits higher and the train must be driven more cautiously. In trains with only low-deck dollies, speeds of up to 6 km/h are possible.

The train is released with the quick pedal release: the operator frees it with their foot, without bending down. Dollies with the Easy Lock system, such as Dolly Type VII, hitch to each other by resting the drawbar in the hook area: the pin locks by itself, without errors.

Polyamide (PA) is the standard castor: hard and smooth-rolling, it suits smooth industrial floors. Elastic rubber is softer and quieter and is kind to delicate floors. ESD polyamide dissipates electrostatic charges and is needed in areas where electronic components are handled. On request there are also ESD rubber, polyurethane, ESD polyurethane and Clean wheel. All have ball bearings.

Yes, up to 3 dollies in 1955 mm of height. Low-deck dollies (Type I, II and VII B), on the other hand, reach 15 units.

With the Lean Adaptor Pallet, the steel pallet for dollies: it carries 4 600x400 dollies, or 2 800x600 dollies, 1 800x600 and 2 600x400 dollies, or one 1200x800 dolly, up to 1000 kg. You move it with the forklift from the long and the short side and load it onto the truck; on arrival the dollies come off the pallet without lifting them.

Yes. We start from what you move (containers, sizes and weights), the routes and the floors: we propose the type of dolly, castors, drawbar and accessories and how to build the train with the tow vehicles you have. With LeanProducts you have a single point of contact for spare parts and support too.