Skip to Content
  1. All Products
  2. AL Modular System
  3. Connection elements
  4. Connectors and fittings
  5. Profile connector

Profile connector

https://leanproducts.eu/web/image/product.template/3565/image_1920?unique=1d9bc53

Zinc-plated steel profile connector for butt-joining two aluminium strut profiles in line: it is inserted into the slot across the joint and locked with the included screws. Length 50 or 180 mm, for slot C8 and C10.

Read more ↓
Code: 3842528746
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Surface treatment
  • Tightening torque Nm
  • Production method
  • Technical notes
  • Type
  • Length mm
  • Material
  • Slot
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1 Bosch 5SV
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Surface treatment Zinc plating
Tightening torque Nm 8,5
Production method Moulding
Technical notes Giunto profilato 50; incl. materiale di fissaggio
Type 50
Length mm 50
Material Zinc-plated steel
Slot C8
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1 Bosch 5SV

One connector aligns and joins the two profiles; for a particularly stable connection, fit a connector in every slot, i.e. four in a profile with four slots.

The kit is shorter: two 52 mm elements with two M8 threads each, tightening 18 Nm. The profile connector 180 for slot C10 is 180 mm long, has four M8 threads and is tightened to 25 Nm.

The 50 mm connector is compact and is locked with two grub screws. The 180 mm one is fixed with four screws spread over a greater length and gives a stiffer joint. For slot C10 there is the 180 mm version.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products