Skip to Content
  1. All Products
  2. AL Modular System
  3. Mounting of surface elements
  4. Profile for protective grid

Profile for protective grid

https://leanproducts.eu/web/image/product.template/2935/image_1920?unique=1d9bc53

Black anodized aluminium profile with inner and outer corner pieces for building frames of corrugated mesh (wire up to 3.1 mm) or panels up to 6 mm, to screw onto profiles with slot C10, also as a retrofit.

Read more ↓
Code: 3842305766
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Slot mm
  • Colour
  • Surface treatment
  • Production method
  • Technical notes
  • Material
  • Component
  • Length mm
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Colour black
Material Anodised aluminium
Surface treatment Anodising
Production method Extrusion
Technical notes Supplied in 3100 mm length due to anodising contact points
Component profile L 3000
Slot mm 10
Length mm 3000
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

You screw it onto the profile from outside with M6 screws and M6 T-nuts in slot C10, even with the structure already assembled. Alternatively the frame is inserted into the slot of an aluminium profile or of the sliding door profile Al 45.

The bush fixes the mesh directly in the slot of the frame, point by point. The profile for protective grid creates a frame for the mesh that screws onto the profile from outside, even with the structure already assembled.

The nominal bar is 3000 mm, but it comes 3100 mm long because the ends have the anodizing contact points. Calculate the cuts on the usable 3000 mm.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.