Skip to Content
  1. All Products
  2. AL Modular System
  3. Connection elements
  4. Connectors and fittings
  5. Slot connector

Slot connector

https://leanproducts.eu/web/image/product.template/3560/image_1920?unique=1d9bc53

Zinc-plated steel slot connector for joining aluminium profiles with slot C8, C10 or mixed C8/C10 without machining: it slides in the slot and has a pre-assembled set screw. Up to 3000 N in slot C10.

Read more ↓
Code: 3842558566
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • ESD
  • Slot
  • Load capacity Fmax N
  • Technical notes
  • Moment Mmax Nm
  • Material
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Slot C8
ESD yes
Load capacity Fmax N 1000
Moment Mmax Nm 35
Technical notes Mmax 35/15 Nm; coppia 2,5 Nm (M4) / 10 Nm (M8)
Material Zinc-plated steel; PA6 anti-rotation
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

8/8 if both profiles have slot C8, 10/10 if both have slot C10, 8/10 to join a profile with slot C8 to one with slot C10. The 10/10 holds three times as much: 3000 N versus 1000 N.

It prevents the connector from rotating in the slot. In the 10/10 and 8/10 versions you can remove it when you want to orient the connection differently.

Both require no machining and in slot C8 they hold the same, 1000 N. In slot C10 the tensioning connector carries more (3500 N versus 3000 N) and leaves the other three slots free; the slot connector also has the mixed C8/C10 version and, with the anti-torsion element removed, can be oriented as you like.

Both require no machining and in slot C8 they hold 1000 N. In slot C10 the tensioning connector carries more (3500 N versus 3000 N) and leaves the other three slots free; the slot connector has the mixed C8/C10 version and variable orientation.

The 10/10 version holds 3000 N and 110 Nm, the 8/8 and 8/10 versions 1000 N and 35 Nm. These are static limit values: apply your own safety factors.

In the 8/8 and 8/10 versions: 2.5 Nm for the M4 screw and 10 Nm for the M8 screw. In the 10/10 version the M6 screw is tightened to 7 Nm.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products