Skip to Content
  1. All Products
  2. AL Modular System
  3. Connection elements
  4. Screws and anchors
  5. T-bolt

T-bolt

https://leanproducts.eu/web/image/product.template/2897/image_1920?unique=1d9bc53

Zinc-plated steel T-bolt for aluminium strut profiles with slot C8 (M6) or C10 (M8): it enters the slot from the front and, with the flange nut, fastens angles, brackets and accessories. 4000 N in slot C8, 6000 to 18000 N in slot C10.

Read more ↓
Code: 3842528718
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • ESD
  • Slot
  • Surface treatment
  • Load capacity Fmax N
  • Tightening torque Nm
  • Production method
  • Technical notes
  • Material
  • Brand
  • Thread
  • Length mm

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5SP
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Slot C8
ESD yes
Surface treatment Zinc plating
Load capacity Fmax N 4000
Tightening torque Nm 25
Production method Moulding
Technical notes Fmax 6000…18000 N depending on the profile
Material Zinc-plated steel
Brand Bosch Rexroth
Thread M6
Length mm 16 mm
Tags
Tags
Bosch 5SP

M8x20 T-bolts for slot C10 and M8 flange nuts, to be ordered separately. The 103x103x37 version already includes the fastening material.

On the 45x45 or 45x45L profile with two M8x25 T-bolts and two M8 flange nuts. On the 22.5x45 frame profile with one 5.5x45 self-tapping screw, one M6x20 T-bolt and one flange nut. No machining needed.

Add the thickness of the part to be fastened to the height of the flange nut: the thread must engage the whole nut. For example, the sheet metal angle and the bracket are fastened with the M8x20, the 120x120 base plate with the M8x30.

The flange nut: M6 for the screw in slot C8, M8 for the screw in slot C10. The collar rests on the part being fastened.

With the screw, the thread protrudes from the slot: slide on the drilled part and lock it with a nut from the outside, handy for angles, brackets and plates. With the T-nut, the thread stays in the slot and you fasten the part with a screw from the outside.

It is the profile slot that gives way, not the screw: in light profiles the capacity is lower, in solid, large ones it is higher. Tell us the cross-section and we will give you the value.

It shows how the hammer head is oriented inside the slot. After turning it, check the notch: if it is in the right position, the head is engaged under the slot lips and you can tighten the nut.

With accessories that have a through hole: sheet metal angles, brackets, base plates, mounting brackets. The screw goes into the slot, the part slides onto the thread and is closed with the flange nut.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products