Skip to Content
  1. Products
  2. Green Frame
  3. GF-S Ø 19 mm
  4. Profiles
  5. GF-S profile

GF-S profile

https://leanproducts.eu/web/image/product.template/348/image_1920?unique=f20c9d2

Anodised Ø 19 mm aluminium tube from the Green Frame GF-S series: light (0.20 kg/m) for frames, dividers, guards and small structures, combinable with GF-N. 4000 mm bar or cut to length.

Read more ↓
Code: GFF-400
Length: 4,000
  • Length
  • Material
  • Weight

Cut dimensions

mm
19 × 19 mm Real profile section
0Full bar 4000 mm
Calculating price…
Full bar Full sheet of the sheet From {min} to {max} mm · full bar {max} mm Up to {maxl} × {maxw} mm · minimum {min} mm Length between {min} and {max} mm. Width between {min} and {max} mm.

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
SUS
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Length 4000
Material Anodised extruded aluminium
Weight 0.20 kg/m
Tags
Tags
SUS

When loads are light and size and weight matter: dividers, guard bars, small frames, supports, mechanisms. For uprights and cross members of workstations and shelving, use GF-N Ø 28.

The moment of inertia is 0.27 × 10⁴ mm⁴ against 1.16 × 10⁴ for GF-N: about a quarter. This is why GF-S suits short spans and light loads.

With the mixed connectors: 90° outer GF-S with GF-N/G, parallel and cross. This way you attach Ø 19 tubes to Ø 28 or Ø 43 uprights without adapters.

Outer and inner 90°, inner 45°, corner, cross, parallel, rotating and sliding connectors, plus the 45° brace to stiffen joints. They are all specific to the Ø 19 tube.

Yes: GF-S slides inside the GF-N Hard profile. This way you make height-adjustable uprights with two tubes from the system.

With the M6 threaded insert for GF-S in the end of the tube. If you need an M8 foot screwed in directly, there is the GF-S Hard profile, whose end can be threaded M8.

The GF-S profile is the basic Ø 19 tube. The one with C6 slot adds a slot for slot nuts, hooks and accessories. The Hard has a thick wall, almost double the moment of inertia and an M8 threadable end for feet. The W joins two tubes into a 44 mm wide profile, more than 10 times stiffer when mounted upright. F35 and F22 have a flat flange for labels, tags and light supports.

The GF-N Ø 28 is the standard for workstations, flow racks and trolleys. The GF-S Ø 19 weighs about half as much (0.20 kg/m versus 0.37) and is for light frames, dividers, guards and small mechanisms. The GF-G Ø 43 is for uprights and cross members that have to carry a lot: over a 1000 mm span it supports 851 N at the centre versus 195 N for the GF-N, for the same deflection. It is often worth mixing them, for example GF-G uprights and GF-N cross members joined by mixed connectors.