External 90° connector GF-S with GF-N/G
Die-cast aluminium external 90° connector that joins a GF-S Ø 19 tube to a GF-N Ø 28 or GF-G Ø 43 tube. It lets you fit light cross members and bars on a sturdier frame, within the same system.
Green Frame · GF-S Ø 19 connectors
External 90° connector GF-S with GF-N/G
With this connector you use the right diameter at every point: the upright stays Ø 28 or Ø 43, while light cross members, bars or supports become Ø 19. It tightens with an M5 × 15 screw.
Why choose it
Mixed structures
Join the light GF-S series to GF-N and GF-G frames.
Weight where it is needed
Sturdy tubes for the uprights, Ø 19 for lightly loaded parts.
Repositionable
Loosen the screw, move the tube and retighten.
Application example
The mixed connector brings the light GF-S series onto GF-N and GF-G frames.
- Bars and guards: in Ø 19 on Ø 28 uprights
- Tool holders and light brackets: attached to the main frame
- Dividers: light cross members between sturdy uprights
Data and compatibility
| Specification | Value |
|---|---|
| Part number | GFJ-020 |
| Joins | GF-S Ø 19 tube with GF-N Ø 28 or GF-G Ø 43 tube |
| Material | Die-cast aluminium, steel screw and nut |
| Screw | M5 × 15 |
| Weight | 25 g |
To stiffen the joint between Ø 19 and Ø 28 or Ø 43 there is the GF-S 45° brace with GF-N/G.
GF-S profileGF-S Ø 19 tube
GF-N profileGF-N Ø 28 tube
GF-G profileGF-G Ø 43 tube
45° brace GF-S with GF-N/GBrace for the mixed joint
Parallel connector GF-S with GF-N/GMixed parallel connectorNeed help choosing connectors?
Send us a sketch of the structure: we will tell you the part numbers, quantities and cut lengths.