Name: Aluminium strut profile 45x45 °
Brand: Bosch Rexroth
SKU: 3842993014

AL Modular System · C10 profiles

Aluminium strut profile 45x45 °

The 45x45 ° is an angled profile: its two 10 mm slots are not on sides at 90°; one is inclined at 45°. You use it to close the corners of frames and guards at 45°, for inclined surfaces and panels or for multi-sided structures, fixing the other profiles with the standard slot C10 nuts and screws. Full bar or cut to length.

45 series45° inclined slot2 slots C102.0 kg/m6070 mm bar or cut to length

Why choose it

45° corners

The inclined slot gives you a 45° mounting face without dedicated brackets or connectors.

C10 accessories

Slot C10 nuts, screws and sliding blocks, the same as the rest of the structure.

Dedicated cover cap

Shaped 45x45 ° cover cap, signal grey or black ESD.

Choose it if…

You need a 45° angle between two elements of the structure.
You want a sloped panel or surface without brackets.
The structure is in the 45 series with slot C10.

Choose another solution if…

You need a 30° angle: Aluminium strut profile 45x30 ° →
You need a 60° angle: Aluminium strut profile 45x60 ° →
You work with the 40 series: Aluminium strut profile 40x45 ° →

Not sure which profile to choose? Open the guide with the profile table →

Technical data

Property	Value
Code	3842993014 (full bar) · 3842993014L (cut to length)
Section	45 series, two slots at 45°
Slot	C10 (10 mm), two slots
Cross-sectional area	7.6 cm²
Weight	2.0 kg/m
Moment of inertia	Ix = 13.4 cm⁴ · Iy = 21.4 cm⁴
Section modulus	Wx = 5.2 cm³ · Wy = 6.4 cm³
Torsion	It = 9.0 cm⁴ · Wt = 6.8 cm³
Slot load capacity	7000 N with T-nut · 12000 N with sliding block (static limit, largest thread)
Bar length	6070 mm
Minimum cut length	50 mm
Alloy and finish	EN AW-6063 (AlMgSi) extruded, anodised E6/EV1, 12 µm
Cover cap	Cover cap 45x45 °, signal grey or black ESD

The x and y axes are those of the section drawing in the attached PDF.

Downloads

MGE catalogue pages 15 Download PDF

Related products

Cover cap for profileCover cap 45x45 °

Aluminium strut profile 45x30 °Profile 45x30 °, 30° angle

Aluminium strut profile 45x60 °Profile 45x60 °, 60° angle

T-nutT-nut C10

Aluminium strut profile 45x45Profile 45x45 to connect

Any other questions?Read the 11 FAQs →

Need help with your profile parts list?

Send us a sketch or the parts list: we will give you codes, accessories and cut lengths.

Request a quote Call +39 0434 572757

Specifications

Brand	Bosch Rexroth
Section mm	45x45
Slot mm	10
Cross-section area cm²	7.6
Moment of inertia Ix / Iy cm⁴	13.4 / 21.4
Section modulus Wx / Wy cm³	5.2 / 6.4
Max length mm	6070
Length	6070
Weight	2.0 kg/m
Material	Anodized aluminium

It depends on the angle you need between the two elements: the 45x45 ° for 45° corners, the 45x60 ° for 60° corners. They use the same slot C10 nuts; only the cover cap differs.

For connecting elements at 45° to each other: closing the corner of a frame or guard, supporting an inclined panel or surface, building multi-sided structures. You fix the other profiles in the inclined slot with slot C10 nuts and screws.

It depends on the angle you need between the two elements: 30°, 45° or 60°. They use the same slot C10 nuts; the cover cap differs, as it is shaped to each profile.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.