TCB 1000 SS stainless steel low-profile lift table

Yes: platform top, base frame and scissor are in AISI 304 stainless steel, and the control panel and switches are IP65. It is designed for the food, chemical and pharmaceutical sectors, where hygiene standards are high.

Platform, base frame and scissor mechanism in AISI 304 stainless steel (EN 1.4301); wheels, axles and bolts in AISI 303 (EN 1.4305); stainless steel nipples and piping, wheels in stainless steel and polyurethane. The standard cylinders are type 2, with stainless steel rods and covers; type 3 in AISI 316 on request.

Control panel and switches IP65, motor IP54. Power supply 3 × 415 V/50 Hz with 24 V DC controls.

No: closed, it is 85 mm high and stands on the floor.

Yes: the platform top can be drilled to fix equipment or guides, avoiding the area where the scissor mechanism moves.

A lift table brings the load to the right working height at the push of a button: people work without bending and without lifting by hand. If the load also has to move between workstations there is the scissor lift trolley; for picking from pallets and bins, the pallet lifters and tilters.

Start from three things: the weight of the load and how it rests, the lowest and highest working height (the difference is the stroke) and the platform size you really need. Then consider cycles per hour, environment and safety. The lift table buying guide, with its 4-question selector, shows you the suitable models.

For long or heavy loads there is the double horizontal scissor: two synchronised scissors in tandem lift a platform up to 6000 mm long, with capacities up to 10,000 kg. For long strokes without a bigger footprint, also to connect two levels, the double, triple or quadruple vertical scissor reaches a 6000 mm stroke.

Yes: it is CE marked to EN 1570-1, tested with a load 30% above the rated capacity and supplied with the declaration of conformity. As standard it has the anti-crush safety bar on all 4 sides, the double non-return valve against sudden lowering and maintenance props.

Only trained people accompanying the goods: EN 1570-1 allows this with no more than two stops and without travelling past a fixed floor. Guard rails and a gate, an anti-slip platform if there is a risk of slipping and the marking that authorises people on board are required: it is not a lift nor an aerial work platform.

A flat, level concrete base of at least C12/15, anchoring with at least four expansion bolts and the electrical connection made by an authorised electrician. The CEE plug, motor protection and main switch are normally not included in the supply.

About 4 times a year or every 1000 cycles, whichever comes first: check the hydraulic oil (ISO 32) for leaks and level, hoses and cables, emergency stops, safety bar and labels. To work under the platform, raise it unloaded, engage the maintenance props and switch off the power; use only original spare parts.

In the “Documents” section of the product page: the user manual covers installation, maintenance, troubleshooting and the UC-60 wiring and hydraulic diagrams. To order spare parts you need the machine type and serial number shown on the rating plate.