Skip to Content
  1. Products
  2. Green Frame
  3. GF-N Ø 28 mm
  4. Profiles
  5. GF-N profile with C10 slot

GF-N profile with C10 slot

https://leanproducts.eu/web/image/product.template/302/image_1920?unique=f20c9d2

Green Frame Ø 28 mm profile with 10 mm slot for T-nuts: fix plate castors, panels, hooks and rollers where needed. Typical base of tube trolleys. 0.68 kg/m, 4000 mm bar or cut to length.

Read more ↓
Code: GFF-004
Length: 4,000
  • Length
  • Weight
  • Material

Cut dimensions

mm
28 × 24 mm Real profile section
0Full bar 4000 mm
Calculating price…
Full bar Full sheet of the sheet From {min} to {max} mm · full bar {max} mm Up to {maxl} × {maxw} mm · minimum {min} mm Length between {min} and {max} mm. Width between {min} and {max} mm.

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
SUS
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Length 4000
Weight 0.68 kg/m
Material Anodised extruded aluminium
Tags
Tags
SUS

Slide a T-nut into the slot, position the component and tighten the screw: you can move it along the profile whenever you like. This is how you mount castors, brackets, panels, sensors and hooks without drilling the tube.

Two slotted profiles are placed side by side under the base and the castor plate is fixed with four T-nuts. For castors from Ø 100 mm upwards, add the spring washer. The foot brake is mounted on the same profiles.

On the side the profile is stiffer: over a 1000 mm span it takes 334 N at mid-span against 200 N with the slot underneath, always with 5 mm of deflection. Under trolley bases the slot faces down, because that is where you fix the castors.

GF-N external connectors, which clamp onto the round side of the profile. For the end there is the reinforced inner plug GFA-413, or the external plug GFA-401.

Yes. Slot rollers run in the slot: this way you build slides, sliders and small carriages that move along the profile. We will recommend the roller kit suited to the load.

The slotted profile is 24 mm high on the slot side instead of 28, weighs 0.68 kg/m instead of 0.37 and is stiffer with the slot on the side. In exchange for the slot fixings, it connects with GF-N external connectors.

The standard GF-N profile is suitable for most uprights and cross members. If a cross member is long or loaded use the GF-N W mounted on edge (about 10 times stiffer), or the T (about 1.5 times) or the Hard (about 1.7 times, also for joints that take impacts), which have the same diameter. To fix plate castors, panels or rollers with T-nuts choose the profile with C10 slot; F35 and F50 have a flat flange for labels, small parts holders and supports. The sliding profile has a smooth surface for sliding parts and boxes, the round roller profile becomes a roller with the pin connectors, LS and LS with S slot carry a linear slide and the linear guide profile is the track for the linear rollers.

The GF-N Ø 28 is the standard for workstations, flow racks and trolleys. The GF-S Ø 19 weighs about half as much (0.20 kg/m versus 0.37) and is for light frames, dividers, guards and small mechanisms. The GF-G Ø 43 is for uprights and cross members that have to carry a lot: over a 1000 mm span it supports 851 N at the centre versus 195 N for the GF-N, for the same deflection. It is often worth mixing them, for example GF-G uprights and GF-N cross members joined by mixed connectors.